Anyone who operates, cleans services, adjusts, and repairs machinery or equipment should be aware of the hazards associated with that machinery. Authorized employees are those employees who are qualified and trained to clean, repair service, adjust, or unjam energized equipment. Affected employees are those employees who work with or around energized equipment. All employees need to be trained in lockout/tagout (LOTO) procedures that are specific to the piece or type of equipment they work with.

Any powered machinery or electrical equipment that can move in a way that would put people in danger is a hazard that can be prevented by following locking or tagging procedures. Failure to lock out or tag power sources on equipment can result in electrocutions, amputations, and other serious—sometimes fatal—accidents.

What are the most common causes of these accidents?

  • The machine or piece of equipment was not completely shut off before a maintenance or repair operation. Not only must the machine be turned off but also the power source that goes to it must be disconnected or locked out and the potential energy released.
  • Employees believed that the machine’s interlock device would prevent inadvertent movement but sometimes interlock devices fail!
  • The machine was turned on accidentally, either out of carelessness or because the person who turned it on did not realize that another worker was there and could get hurt. Care must be taken to ensure continuity of LOTO protection during shift changes.
  • The machine was not working correctly but was not fixed, turned off, locked or tagged, and someone who did not know about the problem used it.
  • Moving equipment was not blocked.
  • Safety procedures were inadequate or employees had not been provided appropriate training.

Remember the dangers and be on your guard around any machinery and moving equipment. Even if you do not operate the machinery, you could get caught in it and injured if it is not properly disconnected. So what can you do to prevent accidental injury from moving machinery?

  • Identify all jobs and equipment that require lockout of power sources. Types of power sources include mechanical, hydraulic, pneumatic, chemical, electrical, thermal or other hazardous energy sources. Care must be taken to de-energize all potential sources of energy or potential energy.
  • Post warning signs wherever possible to indicate that lockout is required or underway.
  • Develop specific written procedures explaining how lockout is to be done. Remember that each piece of equipment or type of equipment must have its own written LOTO procedure.  For example, if there are two identical mixers, then a single procedure can be used for both. However if the two mixers are different, then a separate procedure needs to be in place for each one.
  • Written LOTO procedures can be laminated and attached to each piece of equipment for easy accessibility or for fast use during an emergency.
  • Train all personnel in the lockout procedures for their particular job and provide periodic refresher training.
  • Allow no deviation from the written policies and procedures and take swift and appropriate action if violations are observed or discovered.
  • Use engineering and administrative controls as much as possible to eliminate the need for lockout.
  • Perform regular maintenance to prevent malfunctioning equipment.
  • Conduct periodic inspections of your LOTO policy at least annually to evaluate effectiveness, and update your procedures as needed.
  • Maintain good documentation of inspections and employee training.

Be aware of your personal safety and the safety of others when working with or around moving equipment and machinery. Always follow proper lockout and tagout procedures, even for a quick or minor repair!

The above evaluations and/or recommendations are for general guidance only and should not be relied upon for legal compliance purposes. They are based solely on the information provided to us and relate only to those conditions specifically discussed. We do not make any warranty, expressed or implied, that your workplace is safe or healthful or that it complies with all laws, regulations or standards.

 

Copyright © 2018, State Compensation Insurance Fund